VETUS Zinc Hull Anode

Protect your investment

Sailing on salt or brackish waters? The cathodic protection offered by VETUS Zinc Hull Anodes
means protection of all metal parts under water. Therefore, anodes is a must not
only for steel boats, but also for wooden, fibreglass and aluminium
hulls. The material these anodes is of
the highest possible standard, the U.S. mil.-A-18001 K.
specifications. Anodes which do not meet these specifications have
little or no effect at all.

The VETUS Zinc Hull Anodes have a protective layer of paint at the mounting side to prevent damage to the paint work of your boat. These anodes are streamlined and mounted either with specially
made studs, which can be welded to a steel hull, or special
through-hull bolts for fibreglass and wooden boats. VETUS supply
these studs and bolts separately.

VETUS Zinc Hull Anode Specifications:

Weight (kg)	1
Dimensions (length x width x height) (mm)	80 x 45
Protected surface with adequate paint (m)	12
Protected surface with worn out paint (m)	6
Protected unpainted surface (m)	3,5

Note: The anodes are supplied excluding connection kit.