VETUS Rigid Waste Water Tank 80L With Connections

Save time on your black tank installation with the VETUS BTANK80C.
It is supplied with the following connections: Fixed hose connector
diameter 19 mm for the breather line. Rotating hose connector
diameter 38 mm with pick-up pipe, for waste water suction. A
diameter 42 mm hole is provided for easy installation of an inlet
fitting, type RT..B. This should be ordered separately according to
the inlet hose diameter. If required, additional inlet fittings may
also be installed. The BTANK80C comes complete with a pre-fitted
inspection lid and is made in accordance with ISO 8099
standards.
The VETUS waste water tank is made from high-grade linear polythene
and is designed to be odour free when used for the temporary
storage of organic waste materials (suited for both black and grey
water). The centre point for a SAE flange gauge sender is
incorporated in the moulding together with 5 blind bolt holes. The
relevant gauge sender should be ordered separately and the
appropriate hole cut in the tank. Further extras include a
discharge pump and the WWCP waste management panel.

Specifications: